XF6-500

The following table columns are arranged to follow the typical panel programming order and values required for each item. For example, you should first program a wireless keypad in Device Setup, where you give it a device number, select a device type, select a device communication type, then enter the wireless serial number before programming other options. For additional installation requirements and programming options, refer to the model's installation guide.

• Models: The accessory item's model number and name, linked to its installation guide.

• Program In: The menu where you program the accessory: Device Setup, Zone Information, Output Information, or Key Fobs.

• Device, Zone, or Output Number: The range of numbers for the accessory, depending on where it is programmed. See above. Keep in mind that although any device can be programmed as device 1 in the panel, that address should be reserved for the primary system keypad in most cases.

• Device Type: If the accessory is programmed in Device Setup, this lists possible device types.

• Device Communication Type: If the accessory is programmed in Device Setup, this lists possible communication types.

• Zone Type: If the accessory is programmed in Zone Information, this lists possible zone types.

• Wireless SN Range: For a wireless device, the typical serial number range of its class.