Status List
To configure the status list, complete the following steps.
Go to Program > Status List.
Enter the addresses of keypads to display each status as needed. For details, refer to "Status List Programming Reference".
Select OK.
Status List Programming Reference
The following reference provides basic descriptions of each field in Status List. Configure each setting as needed.
System Trouble Status Monitors
Enter the addresses of keypads that must display system troubles. This includes AC power, low battery, closing check, panel box tamper, phone line troubles, and wireless troubles. Range is 1-16. Default is 1-16.
Fire Zone Keypads
Enter the addresses of keypads that must display fire zone alarms and troubles. Range is 1-16.
Default is 1-16.
Carbon Monoxide Zone Keypads
Enter the addresses of keypads that must display carbon monoxide zone alarms and troubles. Range is 1-16. Default is 1-16.
Burglary Zone Keypads
Enter the addresses of keypads that must display burglary zone alarms and troubles. Range is 1-16. Default is 1-16.
Supervisory Zone Keypads
Enter the addresses of keypads that must display supervisory zone alarms and troubles. Range is 1-16. Default is 1-16.
Panic Zone Keypads
Enter the addresses of keypads that must display panic zone alarms and troubles. Range is 1-16. Default is blank.
Emergency Zone Keypads
Enter the addresses of keypads that must display emergency zone alarms and troubles. Range is 1-16. Default is blank.
Auxiliary 1 Zone Keypads
Enter the addresses of keypads that must display auxiliary 1 zone alarms and troubles. Range is 1-16. Default is blank.
Auxiliary 2 Zone Keypads
Enter the addresses of keypads that must display auxiliary 2 zone alarms and troubles. Range is 1-16. Default is blank.
Comm Path Trouble
Yes: Display communication trouble on keypads when any communication path fails
No: Does not display communication trouble on keypads when any communication path fails
All: Displays communication trouble on keypads when all communication paths collectively fail