PC Log Reports

PC Log Reports allows you to configure the types of reports that are sent from a panel to a workstation over network.

1. Go to Program > PC Log Reports.

2. Configure Options and Net Options as needed. For details, refer to "PC Log Reports Programming Reference".

3. Select OK.

PC Log Reports Programming Reference

The following reference provides basic descriptions of each field in PC Log Reports. Configure each setting as needed.

Options

Arm/Disarm Reports

Enabled: Sends arming, disarming, and late to close events

Disabled: Does not send arming, disarming, or late to close events

Zone Reports

Enabled: Sends zone status changes

Disabled: Does not send zone status changes

User Command Reports

Enabled: Sends user code changes, schedules changes, and door access denied events

Disabled: Does not send user code changes, schedule changes, or door access denied events

Door Access Reports

Enabled: Sends door access events

Disabled: Does not send door access events

Supervisory Reports

Enabled: Sends system monitor reports along with abort, exit error, system recently armed, late to close, ambush, alarm bell silenced, and unauthorized entry events

Disabled: Does not send system monitor and supervisory events

Real-time Status Reports

Enabled: Sends real-time status events for zones, doors, and outputs

Disabled: Does not send real-time status events

Net Options

Net IP Address

Enter the local IP of the workstation that receives panel reports separated by periods. Default is 0.0.0.0.

Net Port

Enter the port of the workstation that receives panel reports. Default is 2001.