-
Close all programming and configuration windows.
-
Ensure Remote Link is connected to the panel.
-
Go to Panel > Send.
-
To clear codes, schedules, zone, or area programming from the panel before sending programming, select the appropriate clearing options. To clear the same programmed data from all panels, select All Systems.
-
To automatically request the panel's events after programming is sent, select Request Events.
-
To send only the programming that has changed since the last connection with the panel, select Changes Only.
-
To update the panel time after programming is sent, select Update Time.
-
To automatically disconnect from the panel after programming is sent, select Disconnect on Completion.
-
Select Send.