Device Setup

When programming devices, consult the Quick Programming Reference as needed. To add a device, complete the following steps.

1. Go to Program > Device Setup > Path and select New.

2. In Device Number, enter the device's number. Range for keypad, fire, and expander devices is 1-16 for XR550 Series and 1-8 for all other panel series. Range for doors is 1-16 and 501-961 for XR550 Series and 1- 8 for all other panel series. Valid V-Plex device numbers are 501, 601, 701, 801, and 901. On XR150 panels, device 501 is reserved for a V-Plex device. Range for 1100T is 2-16 for XR Series panels or 2-8 for all other compatible panels.

3. In Name, enter a name for the device.

4. In Device Type, select one of the following types:

   • Door (DOOR)

   • Fire (FI)

   • Keypad (KPD)

   • Zone Expander (EXP)

   • 1100T Wireless Translator (TLR)

   • Vplex PL-500 (VPX)

5. In Device Communication Type, select Keypad Bus, AX-Bus, Network, or Wireless.

6. For wireless devices, enter the device Serial Number and select a Supervision Time.

7. For 1100T Wireless Translators, select an 1100T Frequency: o HWL (345 MHz) (Honeywell 5800) o 2GIG (345 MHz) (2GIG) o INT (319.5 MHz) (Interlogix) o DSC (433 MHz) (DSC)

8. Configure additional options as needed.

9. If necessary, enter a description for the device installation.

10. To configure 734 options for doors, go to the 734 Options tab. To configure card formats, select Card Formats.

11. Select Apply. Repeat steps 1-10 to add more devices as needed.

12. Select OK.