Key Fobs

When programming key fobs, consult the Quick Programming Reference as needed. To add a key fob, complete the following steps.

Note: For XR Series Control Panels, key fobs can also be programmed as wireless panic zones in Zone Information. The valid zone range is 500-599 for XR150 panels and 500-999 for XR550 panels.

1. Go to Program > Key Fobs and select New.

2. In Number, enter a zone number for the key fob. Refer to the Key Fob Zone Numbers table for acceptable ranges.

3. In User, select More and choose a user.

4. In Serial Number, enter the 8-digit serial number. Key fob range is 05000000-05999999.

5. In Supervision Time, select a supervision time for the key fob. For key fobs that are taken off-site, select None. Default is None.

6. In Number of Buttons, enter 1, 2, or 4.

7. Select Apply.

8. Program the button Action, Select Time, Areas, Output, and Output Action as needed.

9. Repeat steps 1-8 to add more key fobs as needed.

10. Select OK.