Profiles allows you to add, delete, or change user profiles for XR Series Control Panels.
-
Go to Program > Profiles and select New.
-
In Profile, enter a number for the profile.
-
In Name, enter a name for the profile.
-
In Arm/Disarm Areas, enter the number for the areas that you want to authorize this profile to arm and disarm
-
In Access Areas, enter the number for the areas you want to authorize access for this profile.
-
If necessary, go the Output Group field and assign each profile to an output group number. Range is 1-20. Default is 0.
-
If necessary, go to the ReArm Delay field and enter a number of minutes to be used to delay automatic rearming when the user disarms an area outside of schedule. Range is 0-720 minutes. Default is 0.
-
If necessary, go to the Inactive User Audit Days field and set the number of days a user code can remain unused before the panel sends an Inactive User Code message to the receiver and changes the user code status to inactive. Range is 0-425 days. Default is 0.
-
Select access privileges as needed.
-
To assign an existing schedule to the profile, go to the Schedules section, select More in the row of each schedule, and double-click the appropriate schedule.
-
To assign private doors to the profile, go to Private Doors and select the appropriate doors configured in the system's Device Setup menu. Up to 4 private doors can be assigned to a profile.
-
If necessary, add a description for the profile.
-
Select Apply. Repeat steps 1-12 to add more profiles as needed.
-
Select OK.